Rear Lighting Wiring Harness

Price: P 9,500 /pair

FOR REAR-MOUNTED CAMPING & WORK LIGHTS | PLUG N PLAY HARNESS

THE EASIEST WAY TO POWER REAR OR SIDE-MOUNTED LED LIGHTS!
– If you’re setting up rear or side-mounted LED lights to use for camping, dark jobsites or anywhere you need bright light at the flick of a switch, the Kings Rear Lighting Wiring Harness is the perfect solution! .

POWER AT THE FLICK OF A SWITCH
– Similar to our driving light and lightbar harnesses, the key difference is the relay does not rely on a highbeam headlight trigger. Instead, you control your lights by turning the included flush-mount rocker switch on or off – it’s that easy.

DESIGNED FOR ULTIMATE EASE OF INSTALLATION
– There’s no cutting, joining or soldering required with the Kings Rear Lighting Wiring Harness – all you need is spanners to connect it to your battery, and the rest of the connections are handled with Plug n Play Deutsch DT-style connectors that are compatible with all Kings LED lightbars and worklights.

ENOUGH LENGTH – BECAUSE SIZE MATTERS
– There’s enough room with this incredible light harness to set it up exactly how YOU want to. Mount the relay wherever you want, and from there you get a 1.3m long Y-splitter cable, and a pair of 2.0m long extension cables. There’s even a 2.7m long cable up to the switch, meaning you could easily mount the relay in the back of your vehicle near your second battery, connect to a separate LED work light on either side of your roofrack, AND have it controlled with a switch mounted in your dash!

QUALITY COMPONENTRY FOR SERIOUS LONGEVITY
– There’s no cutting corners here – this amazing harness is built from the right stuff. Quality 12AWG cabling carries power properly along the full length of the harness, a 40A relay handles the job of directing power as needed, and a 25A inline blade fuse keeps the entire circuit protected. Too good!

Code: kings-led3″-work-combo

Other Products You Might Be Interested In